Headphones Operation; Controls - Jeep GRAND CHEROKEE WK 2022 Owner's Manual

174 MULTIMEDIA
13. Channel/Screen Selector Switch — Indicates
which channel is being controlled by the
remote control. When the selector switch is in
the Channel 1 position, the remote controls
the functionality of headphone Channel 1 (left
screen). When the selector switch is in the
Channel 2 position, the remote controls the
functionality of headphone Channel 2 (right
screen).
14. — Push to navigate menus.
15. SETUP — Push to access the screen settings
menu.
16. — Push and hold to fast forward through
the current audio track or video chapter.
17. — Begin/resume or pause disc play.
18. Four Colored Buttons — Push to access
Blu-ray™ Disc features.
19. POPUP/MENU — Push to bring up repeat and
shuffle options, the Blu-ray™ Disc pop-up
menu, the DVD title menu, or to access disc
menus.
H O
EADPHONES PERATION
The headphones receive two separate channels of
audio using an infrared transmitter from the video
screen.
If no audio is heard after increasing the volume
control, verify that the screen is turned on, the
channel is not muted, and the headphone channel
selector switch is on the desired channel. If audio
is still not heard, check that the batteries are
charged.
Rear Seat Entertainment Headphones
1 — Power Button
2 — Volume Control
3 — Channel Selection Switch
C
ONTROLS
The headphone power indicator and controls are
located on the right ear cup.
NOTE:
The rear video system must be turned on before
sound can be heard from the headphones. To
conserve battery life, the headphones will auto-
matically turn off approximately three minutes
after the rear video system is turned off.
Changing the Audio Mode for Headphones
1. Ensure the Remote Control channel/screen
selector switch is in the same position as the
headphone selector switch.
NOTE:
When both the headphone and the remote

control channel selector switches are on
Channel 1, the Remote is controlling
Channel 1 and the headphones are tuned
to the audio on Channel 1.
When both the headphone and the remote

control channel selector switches are on
Channel 2, the remote is controlling
Channel 2 and the headphones are tuned
to the audio on Channel 2.