Headphones Operation; Controls - Jeep GRAND CHEROKEE 2021 Owner's Manual

12. SOURCE — Push to enter Source Selection
screen.
13. Channel/Screen Selector Switch — Indicates
which channel is being controlled by the
remote control. When the selector switch is
in the Channel 1 position, the remote
controls the functionality of headphone
Channel 1 (left screen). When the selector
switch is in the Channel 2 position, the
remote controls the functionality of
headphone Channel 2 (right screen).
14. — Push to navigate menus.
15. SETUP — Push to access the screen settings
menu.
16. — Push and hold to fast forward through
the current audio track or video chapter.
17. — Begin/resume or pause disc play.
18. Four Colored Buttons — Push to access
Blu-ray™ Disc features.
19. POPUP/MENU — Push to bring up repeat
and shuffle options, the Blu-ray™ Disc
pop-up menu, the DVD title menu, or to
access disc menus.
H O
EADPHONES PERATION
The headphones receive two separate channels
of audio using an infrared transmitter from the
video screen.
If no audio is heard after increasing the volume
control, verify that the screen is turned on, the
channel is not muted, and the headphone
channel selector switch is on the desired
channel. If audio is still not heard, check that
the batteries are charged.
Rear Seat Entertainment Headphones
1 — Power Button
2 — Volume Control
3 — Channel Selection Switch
MULTIMEDIA
C
ONTROLS
The headphone power indicator and controls
are located on the right ear cup.
NOTE:
The rear video system must be turned on before
sound can be heard from the headphones. To
conserve battery life, the headphones will auto-
matically turn off approximately three minutes
after the rear video system is turned off.
Changing the Audio Mode for Headphones
1. Ensure the Remote Control channel/
screen selector switch is in the same
position as the headphone selector switch.
NOTE:
When both the headphone and the remote

control channel selector switches are on
Channel 1, the Remote is controlling Channel
1 and the headphones are tuned to the audio
on Channel 1.
When both the headphone and the remote

control channel selector switches are on
Channel 2, the remote is controlling Channel
2 and the headphones are tuned to the audio
on Channel 2.
251
5