Function Operating Part; Error Code And Possible Cause - Cuckoo CRP-RT0609F Operating Instructions Manual

Warm/Reheat
button
Use for warming or
reheating the cooked rice
before eating.
Preset/Auto Clean
button
Use it to preset the cooking
time you want.
When you use automatic
steam cleaning function.
Time/
Setting button
Used to set GABA Rice,
High Pressure Steam, Porridge, Baby
Food, Non Pressure Steam cooking time.
Used to modify the Preset time.
Used to set voice volume and voice setting.
Used to set keep warm temperature,
customize individual keep warm
preference, customize individual cooking
preference.
Used to set 'Nurungi (crispy rice)'.
※ If no operation is done while power cord is plugged, the system while be on standby mode as shown in the figure.
(The menu on standby screen, time, voice and customized rice taste stage may differ depending on user configuration.)
※ If cancel button is pressed during cook, the rice cooker will go on standby mode.
※ Press the button until the buzzer sounds. Picture may vary depending on model.

Error Code and Possible Cause

When the product has any problems or used it inappropriately, you can follow the below marks.
If error persistently shows up even in normal using conditions or after taking measure, inquire with customer service.
22
FUNCTION OPERATING PART / ERROR CODE AND POSSIBLE CAUSE
Menu/
Select button
Used to select Glutinous, High Heat Glutinous, Mixed Rice, High Heat Mixed Rice,
GABA Rice, High Heat GABA Rice, Turbo Glutinous, Scorched Rice, High
Pressure Steam, Non Pressure Rice, Porridge, Baby food, Non Pressure Steam.
Used to change the function selected by the Time/Setting button.
When the inner pot is not placed into the unit.
When pressing the 'High Pressure Cook/Turbo' and 'Warm/Reheat' and 'Preset/Auto Clean' and 'Menu/Select' button,
while the lid handle is on incorrect pressure mode. Turn the lid handle "High Pressure" or "Non Pressure".
When boiling only water and When the product fails.
Please contact Customer Service center.
It is appears on the display when you press 'High Pressure Cook' or 'Preset/Auto Clean' button again,
or if the high pressure cooking has finished and you've never ever turned the handle to "Non Pressure",
It can be solved by turning handle to "Non Pressure" and then turn to "High Pressure". If the problem
persists, contact the customer service center.
Problem on environment sensor. Please
contact Customer Service center.
Problem on temperature sensor.
blink.) Inquire with customer service.
Problem on micom memory. Please contact
Customer Service center.
HIGH Pressure Cook/
Turbo button
Used to start high-
pressure cooking and
high-pressure cooking
NON Pressure Cook
button
Used to start non-
pressure cooking and
non-pressure cooking
Display
Cancel button
This function is used to
cancel a selection or
release remaining steam
in the inner pot. (Keep
pressing the Cancel
button for 2 seconds for
safety reason if you want
to cancel while cooking.)
< Screen on standby >
( " " " " "
mark, mark,
Problem on micom memory. Please contact
Customer Service center.
"
mark