Function Operating Part - Cuckoo CRP-HN10 Fuzzy Series Operating Instructions Manual

FUNCTION OPERATING PART

Function Operating Part
Preset /
Auto Clean Button
Use it by presetting the time
when you desire specific to eat.
(Refer to page 25~26)
When you use automatic steam
cleaning function
(Refer to page 17)
Mode button
for customized taste
function, time-setting,
voice volume setting
keep warm temperature
setting, power saving
movement.
Menu / Selection
button
This button is used to select from
among glutinous rice, turbo glutinous rice, sushi, mixed rice, GABA, GAMASOT rice, nutritious porridge, nu rung ji, rince free,
multi cook, red ginseng, and Automatic Sterilization (Steam Cleaning), and to modify preset time. See page 25.
For setting selected action with mode button and setting gaba time multi-cook time. See page 22, 24.
If no operation is done while power cord is plugged, the system is on standby as shown in the screen in the figure.
(The menu on standby screen, time, voice and customized rice taste stage may differ depending on user configuration.)
If cancel button is pressed during function manipulation, the condition turns to standby condition.
The button has to be pressed until buzzer sounds. There is a chance that the picture may be different with actual one.
Error Code and Possible Cause
When the product has any problems or used it inappropriately, you can follow the below marks.
If error persistently shows up even in normal using conditions or after taking measure, inquire with customer service .
When the inner pot is not placed into the unit.
When pressing the Pressure Cook and Timer botton, while the
Lock/Unlock handle is on "Unlock" Turn the Lock/Unlock handle "Lock"
When boiling only water.
When setting preset time longer than 13 hours
Set the preset time within 13 hours. (Refer to page 25~26)
It appears on the display when you press Start button again, or if the cooking has finished and you've never
ever turned the handle to 'Unlock'. It can be solved by turning handle to 'Unlock' and then turn to 'Lock'.
Ploblem on micom power.
Ploblem on sensor.
This error message shows up when Pressure Cook / turbo or keep warm/reheat button is pressed while separate cover is not
mounted. Mount separate cover. Note: While keeping warm, alarm will sound and keeping warm and reheating do not work.
Keep Warm /
Reheat button
Use it for warming or reheating the
cooked meal right before eating.
(Refer to page 27~29)
Temperature sensor problem or fan motor problem.
mark
This code indicates the function of checking for abnormality of power or product.
Pressure Cook /
Turbo Button
Use it for cooking the rice.
(Refer to page 17)
Cancel button
Use it for cancelling selected
function or releasing remaining
steam in the inner pot.
(Refer to page 34)
When using Power saving
function
(Refer to page 30)
Display
Set button
When you use selected
function or button-lock
function. (Refer to page 31)
<Standby condition screen>
mark, and marks blink.