Cuckoo CRP-RT0609F Operating Instructions Manual page 21

Multi-function electric twin pressure rice cooker
Table of Contents

Advertisement

How to clean the soft steam cap
※ Do not touch the surface of the soft steam cap right after cooking. You can get burned.
❶ Pull off the soft steam cap
❷ Disassemble the hook on the front by pressing in
as shown in the image
the direction of the arrow and wash it with a sponge
above by grasping the
and neutral detergent. After cleaning, please
dented part with your
assemble the parts in order.
fingers and pulling to the
※ Be sure that the inserted side of the Packing is the
side while lifting gently.
correct side of it.
How to use the handle
1. Make sure to close the lid and turn the Lock/Unlock handle to "NON PRESSURE" or "HIGH PRESSURE" while cooking.
• You can select cooking with high pressure when you turn the handle to "HIGH PRESSURE". This is the function of
safety device which indicates that the cooker is properly locked, and cooking with high pressure is available.
• If you turn the handle to "NON PRESSURE" you can choose to cook without pressure or select cooking.
Then "NON PRESSURE" signal is displayed on the Display.
• If "HIGH PRESSURE" or "NON PRESSURE" does not appear on the Display,
Preset/Auto Clean button does not work.
2. When cooking with high pressure is done, turn the Lock/Unlock handle from
"HIGH PRESSURE" to "NON PRESSURE," and then open up the lid with
"Unlock" button.
• If steam is not completely exhausted after cooking, the handle might not be easily
turned from "HIGH PRESSURE" to "NON PRESSURE." In such a case, allow remaining
steam to escape by tilting the Pressure weight.
3. Make sure that the Lock/Unlock handle is completely turned to "NON PRESSURE" when opening and closing the lid.
How to use the handle
Do not try to close the LID by force. It can damage your cooker and cause problems.
1. Check to make sure the inner pot is placed
correctly inside the main body.
2. To close the lid, turn the handle to unlock as
shown in the picture on the left.
HOW TO CLEAN
❸ To reassemble the Soft Steam Cap, fit the cap to
the bump part, and then press the hook in the
direction of the arrow.
3. If there is excess steam inside the inner
pot it might be difficult to lock the handle.
Twist the pressure weight and allow the
excess steam to release. Then try to turn
the handle again.
❹ When installing the soft
steam cap, insert the
cap firmly by pressing
it in the direction as
shown above.
high pressure
non pressure
21

Advertisement

Table of Contents
loading

Table of Contents