Table of Contents
Advertisement
Chapter 2 Installation
Downloaded from
ManualsNet.com
2.1 Package Contents
Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
One Switch
One Resource CD
2.2 Safety Precautions
To avoid any device damage and bodily injury caused by improper use, please observe
the following rules.
Safety Precautions
■
Keep the power off during the installation.
■
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good
■
skin contact and is well grounded.
Use only the power cord provided with the switch.
■
Make sure that the supply voltage matches the specifications indicated on the rear
■
panel of the switch.
Ensure the vent hole is well ventilated and unblocked.
■
Do not open or remove the cover of the switch.
■
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
■
cloth, and never use any other liquid cleaning method.
Site Requirements
■
To ensure normal operation and long service life of the device, please install it in an
environment that meets the requirements described in the following subsection.
Temperature/Humidity
T2500-28TC
search engine
One Power Cord and one
This Installation Guide
Console Cable
Two mounting brackets and
the fittings
L2 Managed Switch
04
Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream L2 and is the answer not in the manual?
Questions and answers