Table of Contents
Advertisement
L2 Managed Switch
19
Configuration
Downloaded from
ManualsNet.com
6. The DOS prompt "T2500-28TC>" will appear after pressing the Enter button as
shown in Figure 5-8. It indicates that you can use the CLI now.
Logon by Telnet
■
To log on to the switch by a Telnet connection, please take the following steps:
1. Firstly CLI commands about configuring Telnet login mode, login authentication
information and Privileged EXEC Mode password should be configured through
Console connection. For more details please refer to the CLI Reference Guide on the
resource CD. Here we take login local mode as an example.
2. Make sure the switch and the PC are in the same LAN.
3. Click Start→Run to open the Run window.
search engine
T2500-28TC
Figure 5-8 Log in the Switch
Figure 5-9 Open the Run window
Advertisement
Table of Contents
