Page 2
Conventions • Some models featured in this guide may be unavailable in your country or region. For local sales information, visit http://www.tp-link.com. • The figures in Chapter 2 to Chapter 3 are for demonstration purposes only. Your switch may differ in appearance from that depicted.
QoS and IGMP snooping/filtering optimize voice and video application. Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of business critical data. SNMP, RMON, WEB and CLI Log-in bring abundant management policies. TP-Link JetStream L2 Managed Switch integrates multiple functions with excellent performance, and is friendly to manage, which can fully meet the need of the users demanding higher networking performance.
Page 5
JetStream L2 Managed Switch The front panel of T2500G-10MPS is shown as the following figure. Figure 1-3 Front Panel of T2500G-10MPS LEDs LED Mode Console Port 10/100/1000Mbps SFP Port Switch Button (RJ-45/USB) RJ45 Port The front panel of T2500-28TC is shown as the following figure. Figure 1-4 Front Panel of T2500-28TC LEDs...
Page 6
JetStream L2 Managed Switch The front panel of The T2600G-28MPS is shown as the following figure. Figure 1-8 Front Panel of T2600G-28MPS Console Port 10/100/1000Mbps SFP Port LED Mode LEDs (RJ45/USB) RJ45 Port Switch Button LEDs For TL-SG5412F/T2500-28TC/T2500G-10TS/T2600G-18TS/T2600G-28TS/T2600G-52TS Indication On: The switch is powered on. Power Off: The switch is powered off or power supply is abnormal.
Page 7
JetStream L2 Managed Switch T2500G-10MPS/T2600G-28MPS has an LED mode switch button which is used to switch the LED status indication. When the Speed LED is on, the port LED is indicating the data transmission rate. When the PoE LED is on, the port LED is indicating the power supply status. By default the Speed LED is on.
Page 8
PE (Protecting Earth) cable of AC cord or with Ground Cable. For detailed information, please refer to the Lightning Protection Guide from the training center of our website http://www.tp-link.com/en/configuration-guides.html. Power Socket Connect the female connector of the power cord here, and the male connector to the AC power outlet.
JetStream L2 Managed Switch Chapter 2 Installation Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One Power Cord, One Console Installation Guide One Switch Cable and One USB Cable Two mounting brackets One Resouce CD...
Page 10
JetStream L2 Managed Switch Site Requirements ■ Temperature/Humidity 40℃ 0℃ Please keep a proper temperature and humidity in the equipment room. Too high/low humidity may lead to bad insulation, electricity leakage, mechanical property changes and corrosions. Too high temperature may accelerate aging of the insulation materials and can thus significantly shorten the service life of the device.
■ Note: For detailed lightning protection measures, please refer to the Lightning Protection Guide from the training center of our website http://www.tp-link.com/en/configuration-guides.html. Installation Site When installing the device on a rack or a flat workbench, please note the following items: The rack or workbench is flat and stable, and sturdy enough to support the weight of 5.5kg at least.
Page 12
JetStream L2 Managed Switch 3. Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at each corner of the device. Figure 2-1 Desktop Installation Feet Bottom of the Device Notch Rack Installation ■ To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1.
JetStream L2 Managed Switch Chapter 3 Connection Ethernet Port Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 3-1 Connecting the RJ45 Port RJ45 Port RJ45 Cable SFP Port The following figure demonstrates the connection of SFP port to an SFP module. Figure 3-2 Inserting the SFP Module SFP Slot...
JetStream L2 Managed Switch Figure 3-3 Connecting the Console (RJ-45) Port Console(RJ45) Connect the Console (USB) port of the device with your computer by the USB cable as the following figure shows. Figure 3-4 Connecting the Console (USB) Port Console(USB) T2600 G-28T Note:...
Flow Control 38400bps None None For the detailed configurations, please refer to the Configuration Guide and CLI Reference Guide. The two guides can both be found on the resource CD or on the download center of our official website: http://www.tp-link.com/en/download-center.html. Connection...
JetStream L2 Managed Switch Appendix A Troubleshooting Q1. What could I do if I forgot the username and password of the switch? Connect the console port of the PC to the console port of the switch and open a terminal emulation program.
JetStream L2 Managed Switch Appendix B Hardware Specifications Item Content I E E E 8 0 2 . 3 , I E E E 8 0 2 . 3 i , I E E E 8 0 2 . 3 u , I E E E 8 0 2 . 3 a b , I E E E 8 0 2 .
EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce Продукт...
Need help?
Do you have a question about the Jetstream L2 TL-SG5412F and is the answer not in the manual?
Questions and answers