Installation; Chapter 2 Installation; Package Contents; Safety Precautions - TP-Link TL-SF1016DS Installation Manual

10/100Mbps Fast Ethernet Switch
ChaCter 1

Installation

11C

Package Contents

Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
One Switch
Two mounting brackets and the
fittings
111

Safety Precautions

To avoid any device damage and bodily injury caused by improper use, please observe
the following rules.
Safety Precautions
■
Keep the power off during the installation.
■
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good
■
skin contact and is well grounded.
Use only the power cord provided with the device.
■
Make sure that the supply voltage matches the specifications indicated on the rear
■
panel of the device.
Ensure the vent hole is well ventilated and unblocked.
■
Do not open or remove the cover of the device.
■
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
■
cloth, and never use any other liquid cleaning method.
Introduction
04
One Power Cord This Installation Guide