Table of Contents
Advertisement
Downloaded from
ManualsNet.com
4. Select the port to connect in Figure 5-6, and click OK.
5. Configure the port selected in the step above as the following Figure 5-7 shows.
Configure Bits per second as 38400, Data bits as 8, Parity as None, Stop bits as 1,
Flow control as None, and then click OK.
search engine
Figure 5-6 Select the port to connect
Figure 5-7 Port Settings
L2 Managed Switch
Configuration
18
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream L2 and is the answer not in the manual?
Questions and answers