Table of Contents
Advertisement
Downloaded from
ManualsNet.com
4. Type in cmd in the prompt Run window as Figure 5-10 and click OK.
5. Type in telnet 192.168.0.1 in the command prompt shown as Figure 5-11, and press
the Enter button.
6. Type in the User name and Password (the factory default value for both of them is
admin) and press the Enter button, then you can use the CLI now, which is shown as
Figure 5-12.
For detailed CLI configuration instructions, please refer to the CLI Reference Guide on
the resource CD.
search engine
Figure 5-10 Run Window
Figure 5-11 Connecting to the Switch
Figure 5-12 Log in the Switch
L2 Managed Switch
20
Configuration
Advertisement
Table of Contents
