Table of Contents
Advertisement
•
The control will start dosing manually for maximum 10 minutes (afterwards it will return to AUTO mode).
Push the "START" button on the relevant dosing pump to allow the pump to operate
•
Make sure that the dosing pump is operating and that the liquid fills in the tubing until injection point on
BCP panel. At this stage, you may turn the pump back to AUTO mode.
•
Repeat operation with Inhib R3.
-
Select Inhib R3
-
Select Utilities
-
Select HOA Menu and switch to "Hand" mode
Push the "START" button on the relevant dosing pump to allow the pump to operate
•
The BCP is now ready to control and dose.
Push the "START" button when necessary
SHUT DOWN
To shut down the controller, simply turn off the power. Programming remains in memory.
For more details on controller functionality, refer to the BACT 100 controller manuals as per submittal
package.
6 Operating Conditions
6 Operating Conditions
W W W . B A L T I M O R E A I R C O I L . E U
31
Advertisement
Table of Contents
