BAC BCP2D Installation, Operating, Maintenance page 25

Settings menu
Choose language
- Press the Confirmation/Settings key
- Press the Enter key
- Press the scroll down key until the English word "language" is highlighted.
- Press the Enter key
- Press the scroll down key until your language is highlighted
- Press the Confirm key to change all menus to your language
Set date (if necessary)
- Press the Scroll Up key until date is highlighted
- Press the Enter key
- Press the Move Cursor key to highlight the day
- Use the Make Character Higher or Lower keys to change the date
- Press the Confirm key to accept the change
Set time (if necessary)
- Press the Scroll Down key until time is highlighted
- Press the Enter key
- Press the Move Cursor key to highlight the HH (hour), and/or MM (minute)
- Use the Make Character Higher or Lower key to change the time
- Press the Confirm key to accept the change
Inputs S1 and S2
S1: Conductivity
Preprogrammed with default values by BAC, see "Default parameters and set points" on page 16
S2: Temperatures
Preprogrammed with default values by BAC, see "Default parameters and set points" on page 16
D1 Flow switch
Preprogrammed by BAC, no action required
D2 Water meter
Note the K value of the water (L/impulse) and enter as alter value as required.
Default preprogrammed value is 1 liter / impulse
• Select input screen
• Select water meter (D2)
• Press the Settings key
• Press the Scroll Down key until the "volume/contact" is highlighted
• Press the Enter key
6 Operating Conditions
6 Operating Conditions
W W W . B A L T I M O R E A I R C O I L . E U
25