Can Not Play Video - RGBlink MSP326 Quick Start Manual

Manually Change IP Address
Step 1. Click Start menu, then type Control Panel and click the option on the result.

Step 2. Open Network and Internet > Network and Sharing Center.

Step 3. On the left pane of the new window, click Change adapter settings.

Step 4. You will be displayed with Network Connections of the PC.

Important note: Right click on "Ethernet" or "Local Area Connection" if you want to change IP of any
physical connection. And right click on "WLAN" in case you wish to change IP of any wireless
connections.
Step 5. Choose Properties after right clicking on the network name.

Step 6. Select the Internet Protocol Version 4 (TCP/IPv4), then click Properties.

Step 7. Obtain an IP Address automatically should be selected by default, but please choose the Use

the Following IP Address.
Step 8. Now put your desired IP Address according to your wish its correct format. Change Subnet mask

and default gateway if you want to.

3.2 Can not Play Video

Check the channel status,if the status is abnormal,then the input decoding address may be wrong or the
decoder can not decoding the video.If it is normal,please contact with our company.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
8