Check Status And Video; Status; Video; Trouble Shooting - RGBlink MSP326 Quick Start Manual

Table of Contents

2. Check Status and Video

After configuration of decoder,you can check the channel status.If the status is normal,then the decoder has

decoded and output the video;If the status is abnormal,then the input decoding address may be wrong or the

decoder can not decoding the video.

Connect the HDMI or VGA connector of decoder to the monitor first and you can watch the video.

If you cannot on open up the WEB UI, check the LAN port and see if it is lit up, if the LAN connection is fine, but

you still cannot open up the page, check your IP address and see if your computer is in the network of

192.168.1.XX, if not here is the method for you to manually check and change your IP address.

Check your IP address

Step 1. Press Windows + X

PowerShell

Step 2. Type ipconfig and hit Enter, then the information will be displayed in the window.

Ph: +86 592 5771197 |

support@rgblink.com

keys together and open Windows

(or Command Prompt).

www.rgblink.com

Table of Contents