Installation; Installing The Head Rail - Dometic SKYSOL CLASSIC Installation And Operating Manual

Hide thumbs Also See for SKYSOL CLASSIC:

Table of Contents

Skysol Classic & Honeycomb

After delivery, the blind type and the scope of delivery should be

checked according to the order confirmation. The number on the prod-

uct label indicating the blind type is located on the back of the head rail.

Shaped handed pairs can look similar.

Installation

Powered blinds: Disconnect the power supply before you begin and

ensure that it can not be reconnected until installation has been com-

The blind can be fitted face fixed in front of a wall or recess fixed in a wall recess or to

the ceiling. The head rail can be fitted to the top or to the bottom of the window.

There are different head rails for powered blinds and manual blinds.

Depending on the space in the installation location, the sequence of installing the

blind components may vary (e.g. to fit the bottom bar first).

Ensure enough room behind the brackets to be able to access the

release clip.

Installation

Table of Contents