Installation - Dometic Skysol Classic Installation And Operating Manual

Installation

I
NOTE
After delivery, the blind type and the scope of delivery should be
checked according to the order confirmation. The number on the prod-
uct label indicating the blind type is located on the back of the head rail.
Shaped handed pairs can look similar.
7 Installation
!
CAUTION! Risk of injury
Important safety instructions. Follow all instructions since incorrect
installation can lead to severe injury.
7.1 Installing the head rail
!
WARNING!
Powered blinds: Disconnect the power supply before you begin and
ensure that it can not be reconnected until installation has been com-
pleted.
The blind can be fitted face fixed in front of a wall or recess fixed in a wall recess or to
the ceiling. The head rail can be fitted to the top or to the bottom of the window.
There are different head rails for powered blinds and manual blinds.
Depending on the space in the installation location, the sequence of installing the
blind components may vary (e.g. to fit the bottom bar first).
I
NOTE
Ensure enough room behind the brackets to be able to access the
release clip.
10
Skysol Classic & Honeycomb
EN