Installation; Installing The Brackets - Dometic Oceanair Romanblind Installation And Operating Manual

Hide thumbs Also See for Oceanair Romanblind:

Table of Contents

Installation

• To avoid strangulation and entanglement, install the head rail in a dis-

tance of at least 1.5 m from the floor in order to keep it out of the

reach of young children.

• Only for manual blinds: Install the operating elements as close to

the head rail as possible and at least 1.5 m from the floor.

• Only for powered blinds: Disconnect the power supply before

you begin and ensure that it can not be reconnected until installation

has been completed.

Ensure enough room in front of the brackets to be able to access the

release clip.

When installing the brackets, note the following:

• Observe related technical drawings provided with the order for specific dimen-

sions required, depending on head rail size and restraint type.

• Observe sufficient distance to the window recess. Depending on the model,

there must be enough space to close the bracket.

• Ensure that there is sufficient distance from parts of the window so that the blind

can be lowered without obstruction.

• Depending on the model, ensure that there is enough room in front of the brack-

ets to be able to access the release clip.

• Ensure that the brackets do not sit over the tilt mechanisms inside the head rail.

• Ensure that the brackets are close to the edge of head rail for best support.

Romanblind Manual/Powered

Table of Contents