General Assembly Guidelines Ensure that all parts and hardware are available before beginning assembly. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. The three main types of hardware used to assemble this product are wood dowels, screws and bolts.
Parts List 13 13 The side drawer with WARNING LABEL, should be mou ted in highest drawer. Description Description Part# Part# Top panel 0 pcs Drawer runner 12 pcs Base panel 01 pcs Back anel 0 pcs Right side panel 01 pcs Large drawer bottom 0 pcs...
Page 5
Step 1 Please assemble on a clean soft surface to avoid damage. Ø8*20mm Insert Wooden dowel ( ) A and glue ( ) I into part ( Ø8*30mm Insert Wooden dowel (B) and glue ( ) I into part ( ), ( ), ( ), 4 (5), (9), (8), (1 ), (1 ) (1 ) 7 , (19), (20) and (22).
Page 6
Step 2 Secure parts (13) to part (3) and (4) with screw (D) and screwdriver (not included). Ø4,0*25mm Step 3 Please assemble on a clean soft surface to avoid damage. Ø4,0*30mm Secure part (8) to part (1) with screw (F) and screwdriver (not included). Ø4,0*40mm Secure part (5) to part (1) with screw (E) and screwdriver (not included).
Page 7
Step 4 Secure parts (1), (8), (17) and (22) to part ( ) with screw (E) and screwdriver (not included). Ø4,0*30mm Secure part (17) to part (5) with screw (F) and screwdriver (not included) in the pre hole. Ø4,0*40mm Step 5 Secure part (8) to parts (3) and (4) with screw (E) and screwdriver (not included).
Page 8
Step 6 Secure part ( ) to part ( s 16 ), with screw ( ) Ø4,0*40mm and screwdriver (not included). Step 7 Secure part ( s 10 ) to part ( s 16 with screw ( ) and screwdriver (not included). Ø4,0*40mm Step 8 Secure part (...
Page 9
Step 9 Ø 7,0 7 * 0mm Secure part ( ) to part ( ) with screw (G) and hex key (H) Secure part ( ) to part ( ) 3 and (4) with screw ( ) Step 10 and screwdriver (not included). Ø4,0*40mm...
Page 10
Secure part s (9) and (10) to part (2) and attach with screw (E) and screwdriver (not included). Ø4,0*30mm Step 12 Name and address of the supplier and date of production. Secure back panel (14) as show at above to body with screw (N) and screwdriver (not included).
Page 11
Step 13 Secure back lock (24) as show at above with screw (N) and screwdriver (not included). Ø3,5*20mm Step 14 Secure parts (13) to part (5) with screw (D) and screwdriver (not included). Ø4,0*25mm P.11...
Page 12
Step 15 Secure part (11) and (12) to part (6) with screw (E) and screwdriver (not included). Insert part (15) and (7) between parts (11) and (12). Secure part (7) with screw (E) and screwdriver (not included). Ø4,0*30mm Step 16 Ø3,0*12mm Secure handle (J) with screw (C) and screwdriver (not included), in the pre holes on the drawer front.
Page 13
Step 17 Secure part (20) and (19) to part (18) with screw (E) and screwdriver (not included). Insert part (23) and (21) between parts (19) and (20). Secure part (21) with screw (E) and screwdriver (not included). Ø4,0*30mm Step 18 Ø3,0*12mm Secure handle (J) with screw (C) and screwdriver (not included), in the pre holes on the drawer front.
Page 14
Step 19 Insert ooden dowel ( ) into part ( to be the stop of the drawer. Ø8*30mm Step 20 The side drawer with WARNING LABEL, should be mou ted in highest drawer. Drawer Stop Make sure dowel is flush with panel. Insert wood dowel ( ) on the inside of all drawers while drawer is inside the unit.
Page 15
Step 21 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
Page 16
Step 22 Assembly Complete! Maintenance Guide To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails. 1.Bee's wax is recommended or Paraffin wax from a standard candle can be used. 2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact when opening and closing the drawer.