Storage And Maintenance - HoMedics HL158B1-BD Instruction Manual

Storage and Maintenance

General Use

Do not twist the cuff in any way.

Do not press START/STOP button if the cuff is not wrapped

around your wrist.
Do not drop the product and avoid any strong impacts.

Maintenance

Do not attempt to disassemble or change any parts of the

monitor, Only trained technicians are allowed to repair and
disassemble the device, including the cuff and patches, because
a substitution of a component different from supplied might
result in measurement error.
If any suggestion or service is requested, please consult your

service station.
Do not implement the maintenance procedures for equipment

during measurement.
To ensure that your device is in optimal use and to avoid damage,
please refer to the following instructions:
Clean the device and cuff with a soft dry cloth, or

Use a dry cloth with water to clean the device (not directly flush,

do not soak in water, and hold the device dry), or
Do not use detergent or any strong chemicals to clean the device.

Make sure the cuff is completely dry before using.

-25-