Table of Contents
Advertisement
Bluetooth Transmission
2. If HL158B1-BD is connected successfully to your smart device,
Bluetooth symbol
3. If the monitor cannot be connected to paired Bluetooth-enabled
device over 45 seconds, LCD will display Error message "E4" and
Bluetooth will be turned off.
App for Bluetooth
Download and install "DailyChek
Google Play or App store.
System requirement of the Bluetooth-enabled device
□ Bluetooth 4.2 for Android 6.0 or above
□ Bluetooth 4.2 for iOS 7.0 or above
NOTE:
HL158B1-BD is subject to and complies with electromagnetic compatibility
(EMC) standard of EN 60601-1-2, EN 301 489-1, EN 301 489-17, EN 300
328 and U.S. federal guidelines, Part 15 of the FCC (Federal
Communications Commission) rules for devices with RF capability. These
guidelines help ensure that your device will not affect the operation of
other nearby devices. Additionally, other devices should not affect the use
of your device.
Other wireless devices that are in use nearby, such as a cell or mobile
phone, or a wireless network, may prevent or delay the transmission of
data from your device to paired Bluetooth device. Moving away from the
source of the interference or turning off these devices to resolve the
problem.
Make sure HL158B1-BD and paired Bluetooth device are within acceptable
distance (no more than 10 meters) with each other. If not, put them closer.
Be sure to select the correct User on the monitor before your blood
pressure measurement begins.
Bluetooth date transmission is not available under measurement.
About Bluetooth Data Transmission Function
The Bluetooth data transmission function might not be workable to some
Bluetooth-enabled devices because of the compatibility of Android system.
Some issues that the Bluetooth implementations on these devices have unresolved
errors. It is not because of the Bluetooth module in monitor is not supported.
will appear on the screen.
" app on your smart device from
®
-16-
Advertisement
Table of Contents
