HoMedics HL158B1-BD Instruction Manual page 23

Measurement Procedure
B-2-3. Even if the monitor is not in the ideal
position after 10 seconds, the
measurement will still begin. If this
occurs, the wrist symbol will appear
and be stored in the memory with
the measurement.
C. As the cuff inflates, the monitor automatically
determines your ideal level. This monitor detects your blood
pressure and pulse rate during inflation. The Pulse (
flashes at every pulse beat. Remain still and do not move until the
entire measurement process is completed. The device will detect
your pulse and determine the blood pressure.
D. After the monitor has determined your blood
pressure and heart rate, the cuff automatically
deflates. Your systolic rate, diastolic rate, heart
rate, corresponding Risk Category Indicator
Irregular Heartbeat Detector, excessive body
motion detector and wrist position guide (if any)
are displayed with date and time for 1 minute
and save results to memory automatically.
E. Without any operation for 1 minute, device automatically shuts off.
！
*Note
If the cuff does not stop inflating, remove the cuff at once.

To stop measurement, press START/STOP button, the cuff will deflate

immediately after the button is pressed.
-22-
) Symbol