Symbol Definitions - HoMedics HL158B1-BD Instruction Manual

Symbol Definitions

SYMBOLS
Low Battery Symbol
Pulse Symbol
Irregular Heartbeat Detector
Excessive Body Motion
Detector
Cuff Fitness
Detection Symbol
Wrist Position Guide
Bluetooth Symbol
Risk Category Indicator
Bar
Average of Last 3
Measurements
This symbol appears when the battery power is excessively low or the
polarity reverses.
 We suggest you replace all batteries with new ones, and make sure
the +/- polarities are properly positioned.
Once pulse is detected, the symbol flashes with each pulse beat.
 Our suggestion:
Please do not talk or move during measurements.
This symbol appears when an irregular heart beat was detected.
 Our suggestion:
Repeat the measurement after resting for at least 5 minutes, and
restart your measurement while sitting down comfortably and
quietly. If symbols appear frequently, please contact your physician.
Displayed if body movement is detected during measurement,
especially, the movement on the wrist the blood pressure monitor is
worn on. Besides, if cuff is worn improperly, or the shape of the wrist
is unusual, excessive gap might exist between the wrist cuff and the
wrist.
Notice: The measured blood pressure reading may not be accurate if
the icon is displayed.
Displayed if the cuff was wrapped incorrectly, which is too tight or too
loose. This is the function aid in detecting if the cuff is wrapped
properly.
The Wrist Position Guide is used as an aid in determining if the device
is at the appropriate angle and height.
LCD displays this symbol when Bluetooth is active.
AM/ PM Averaging: Indicates the reading being displayed is an
average from the last 3 morning or last 3 evening measurements.
The arrowhead points out the specific Risk Category that your
measurement reading fits in.
This symbol appears when LCD displays average value of last 3
readings.
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
-11-
Definitions