HoMedics HL158B1-BD Instruction Manual page 15

Features
HL158B1-BD has a built-in Wrist Position Guide function used as an
aid to help user determining if the device is at appropriate height.
 Turning Wrist Position Guide ON/OFF
This function default setting is on. User can switch the function ON
and OFF. Under standby mode, users can press
device will enter to set year, date, month, hour, minute and
Bluetooth function first. When these setting are done, press the
button again, use
function ON and OFF.
 Wrist Position Guide
After you press START/STOP button, the display will illuminate
with different icons that are designed to guide you move your
wrist. Once the appropriate height is detected, the Pulse (
Symbol will flash with beep sound for 3 times and measurement
will begin.
SYMBOL
*Note!
This Wrist Position Guide is only for reference on blood pressure measurement. Due to
difference in individual size, physique, and being dependent on the height of the table and
desk, in addition to the position of the hand in comparison to the horizontal plane of reference
and the heart, this feature may not helpful in all cases. If you feel the position of the wrist
according to Wrist Position Guide does NOT match your heart level, you can select to turn this
feature off and consult your healthcare provider.
button to switch the Wrist Position Guide
UP
DOWN
-14-
ACTION
Move your wrist up.
Move your wrist down.
button, the
)