Analog Devices Blackfin Landscape LCD EZ-Extender ADZS-BFLLCD-EZEXT Manual page 3

Table of Contents

Regulatory Compliance

The Blackfin Landscape LCD EZ-Extender is designed to be used solely

in a laboratory environment. The board is not intended for use as a con-

sumer end product or as a portion of a consumer end product. The board

is an open system design which does not include a shielded enclosure and

therefore may cause interference to other electrical devices in close prox-

imity. This board should not be used in or near any medical equipment or

RF devices.

The Blackfin Landscape LCD EZ-Extender is currently being processed

for certification that it complies with the essential requirements of the

European EMC directive 89/336/EEC amended by 93/68/EEC and

therefore carries the "CE" mark.

The Blackfin Landscape LCD EZ-Extender contains ESD (electrostatic dis-

charge) sensitive devices. Electrostatic charges readily accumulate on the

human body and equipment and can discharge without detection. Perma-

nent damage may occur on devices subjected to high-energy discharges.

Proper ESD precautions are recommended to avoid performance degrada-

tion or loss of functionality. Store unused extender boards in the protective

shipping package.

Table of Contents