Page 2
PRIOR TO FIT TING THE TRAY, PLEASE CHECK THE LEVEL AND THAT THE TRAY DRAINS CORRECTLY Level Test - Place the tray at an elevated height using a spirit level across the front, sides and horizontal. Once level, please check the rim of the shower tray as this should have a slight fall into the tray. Once level you can now Water test, remove protective film and check for damage, place a bucket under the waste hole and pour water on the surface of the tray to make sure water drains away towards the drain hole, due to static, some large droplets may remain but large pools should not be evident.
Need help?
Do you have a question about the waifer Aqualavo and is the answer not in the manual?
Questions and answers