Advertisement
Quick Links
Fixed Bath Screen
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Item Number:AQ9352S
This product should be installed by a suitably qualified and proficient person. The fitting instructions should be
followed carefully to ensure a proper and safe installation. Failure to follow these instructions could result in future
injury.
These instructions and list of parts assume that installation is done against solid/tiled walls.
Please check this product for damage prior to starting the installation. No claims can be made after the product has
been fitted.
PLEASE NOTE :The minimum and maximum adjustment sizes noted on the product brochures are based on
perfectly plumb walls and trays.
IMPORTANT
USE SAFETY EYE-WEAR WHEN DRILLING
www.aquadart.co.uk
www
www.aprilproducts.co.uk
www.aprilproducts.co.uk
Lifetime Product Guarantee
To activate your Product Guarantee please
visit www.aquadart.co.uk and complete
the online form.
Tools Required
6
2.75
PH2 TYPE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Aquadart Venturi 6 AQ9352S
Summary of Contents for Aquadart Venturi 6 AQ9352S
- Page 1 Item Number:AQ9352S Lifetime Product Guarantee To activate your Product Guarantee please visit www.aquadart.co.uk and complete the online form. Tools Required 2.75 PH2 TYPE IMPORTANT This product should be installed by a suitably qualified and proficient person. The fitting instructions should be followed carefully to ensure a proper and safe installation.
-
Page 2: Box Contents
COMPONENTS AND BOX CONTENTS Box Contents Description Description Wall Profile Pivot Part 3 Glass Clip A Upright Profile Glass Clip B Connected Profile Glass Clip Cover Frame Profile Wall Plug Profile Top Cap Screw ST3.5x10 Screw Cover Cap Screw ST4x30 Glass Shelf Cover Cap Fixed Glass Panel... - Page 3 Ф6 drill bit 12-15mm from the Ф2.75 drill bit bath edge Step 1: Position the wall profile (1) onto the bath , approximately 12-15mm from the outside bath edge to ensure that the screen runs along the inside edge of the bath rim. (A). Step 2: Level the profile with a spirit level , then mark the position using a pencil.
- Page 4 Assemble The Glass Shelf Ф6 drill bit Inside Inside...
- Page 5 Silicone the outside of the vertical wall post and also the outside of the bottom of the wall post as shown. Allow 24 hours before use for silicone to set. For cleaning instructions see guarantee. Seal NOTE : To ensure a watertight seal ensure the bottom seal (No.10) is fully inserted into the base of the hinge as per the above diagram.
- Page 6 Riverside Business Park,Royd Ings Avenue,Keighley, West Yorkshire,BD21 4AF 01535 613830 Technical:01535 613830 Fax: 01535 613831...
Need help?
Do you have a question about the Venturi 6 AQ9352S and is the answer not in the manual?
Questions and answers