Water Pan Assembly - Hoshizaki IM-240DNE Service Manual

8. WATER PAN ASSEMBLY

1) Remove the top, front and left side panels.
2) Push the reset switch on the control box to open the water pan.
3) Unplug the icemaker or disconnect the power source.
4) Disconnect the pump motor leads in the wiring channel.
5) Remove the two extension springs from the cam arms.
6) Remove the water plate bracket and the water pan assembly.
7) Remove the two spring hook screws from the water tank.
8) Remove the screws and the water plate bracket.
9) Remove the pump suction and discharge tubings.
10) Remove the pump motor bracket from the water plate.
11) Install the new water plate or water tank in the reverse order of the removal
procedure.
12) Replace the panels in their correct positions.
13) Plug in the icemaker or connect the power source.
59