Advertisement
To stop the product
•
Push the stop lever until the engine stops.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
General product maintenance
Make sure that there are no fuel or oil
leaks.
Clean the product.
Make sure that nuts and screws are
tightened.
Examine the throttle control and
choke control for damage.
Make sure that the throttle control
and the choke control can move
smoothly.
Replace the oil for the eccentric ele-
ment.
Examine the vibration damping units
for damage.
Examine the tension of the V-belt
and look for damages. Adjust or re-
place the V-belt as necessary.
1742 - 002 - 04.02.2022
Maintenance
Read and understand the
Before use, each
10 h
*
X
*
*
*
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
After the first 20
Weekly, each
h
X
After 6 months
100 h
or, each 250 h
X
X
X
11
Advertisement
