Advertisement
4. Pull the decompression lever (A) up. Make sure that
the decompression lever is in vertical position.
A
5. Pull the starter rope quickly.
6. Release the starter rope handle to let the starter
rope go back.
7. Pull the starter rope handle until the engine starts.
Note:
If the engine does not start, refer to the
engine manual.
To operate the product
CAUTION:
forward and at full throttle. Lower engine
speed and rearward movement prevent
correct function of the eccentric element and
can cause product failure.
1. Make sure that the throttle control is set to full
throttle.
Note:
Turn the throttle lever in direction (A) to
decrease the speed and in direction (B) to increase
the speed.
10
Always operate the product
2. Carefully push the product forward.
CAUTION:
down. Too much pressure can cause
unsatisfactory result.
3. To turn the product, lift the handle to a 90° angle in
direction to the ground.
A
B
Do not push the product
1742 - 002 - 04.02.2022
Advertisement
