Advertisement
General product maintenance
Replace the recoil spring, thrust
spring and tooth of recoil.
Engine maintenance
Do a check of the fuel level and
the engine oil level.
Clean the cooling fins of the en-
gine.
Examine the air filter. Clean the
air filter if it is necessary.
Clean the air filter.
Replace the air filter.
Replace the engine oil.
Do a check of the engine
speed.
Adjust the valve head clear-
ance for the air intake and the
exhaust valves.
Drain the fuel and clean the fuel
tank and the fuel filter.
Replace the fuel filter.
Do a check and put grease on
the controls and couplings.
Do a check of the injection
pump.
Do a check of the fuel injector.
Clean the exhaust pipe of the
engine.
Do a check of the bearing of
the eccentric element. If it is
worn out, replace it with a new
bearing. Use a torque wrench
to replace the pulley for the
bearing.
Drain the fuel system of water.
Clean the oil stainer.
To clean the product
•
Use running water from a hose or a high-pressure
washer to clean the product.
12
Before use, each
10 h
Before use,
After the first
each 10 h
20 h
X
O
X
X
O
O
After the first 20
Weekly, each
h
Weekly, each
100 h
X
O
O
O
CAUTION:
directly at the fuel tank cap, electrical
components or the engine.
After 6 months
100 h
or, each 250 h
X
After 6 months
Yearly, each
or, each 250 h
500 h
O
X
O
*
O
O
O
Do not point the water
1742 - 002 - 04.02.2022
X
O
O
Advertisement
