Advertisement
the product. Refer to
19 for the correct fuel.
For more information about the fuel, refer to the engine
manual supplied by the engine manufacturer.
1. Open the fuel tank cap slowly to release the
pressure.
2. Fill slowly with a fuel can. If you spill fuel, remove it
with a cloth and let the remaining fuel dry off.
3. Clean the area around the fuel tank cap.
4. Tighten the fuel tank cap fully. If the fuel tank cap is
not tightened, there is a risk of fire.
5. Start the engine, refer to
page 9 . Keep the throttle control in idle position for
some minutes and let the engine become warm.
1742 - 002 - 04.02.2022
Technical data on page
To start the product on
To start the product
1. Set the throttle control to low speed.
2. Pull the starter rope handle slowly until you feel
resistance.
3. Release the starter rope handle to let the starter
rope go back.
9
Advertisement
