Safety Instructions; About This Chapter; Intended Use; Improper Use - Bosch rexroth VT-SSV-1 Operating Instructions Manual

Plug-in switching amplifier
Table of Contents

Advertisement

Safety instructions | Plug-in switching amplifier VT-SSV

2 Safety instructions

2.1

ABOUT THIS CHAPTER

The product has been manufactured according to the generally accepted codes of
practice. However, there is still a risk of personal injury and damage to property if
you do not observe this chapter and the safety instructions in this documentation.
▶ Read this documentation completely and thoroughly before working with the
product.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the product on to
third parties.
2.2

INTENDED USE

The product is an electronic component.
You may use the product as follows:
• For activating on/off valves with a voltage of 24 V DC
• For applications as specified in technical data sheet RE 30262
• While adhering to the operating and ambient conditions according to data sheet
RE 30262
• While adhering to the given performance limits
• In the original condition, without damage
• Repairs by customers are not permitted
The product is intended exclusively for professional use and not for private usage.
Operation according to the intended use also implies that you have read
and understood this documentation completely, especially chapter 2 "Safety
instructions".
2.3

IMPROPER USE

Any use other than described in the section "Intended use" is considered as
improper and is therefore not permitted.
Bosch Rexroth AG does not assume any liability for damage caused by improper
use. The user assumes all risks involved with improper use.
Improper use includes, but is not limited to:
• operating the electronics outside the specified performance limits and operating
conditions, especially the prescribed ambient conditions;
• the use as safety-related part of controls in the sense of DIN EN ISO 13849.
Functional safety must be realized by means of appropriate, additional
components.
• the use in potentially explosive atmospheres
• improper handling and transport
• improper storage
• lack of cleanliness during storage and assembly
• incorrect installation
RE 30262-B, Edition 05.2022, Bosch Rexroth AG
7/24

Advertisement

Table of Contents
loading

Table of Contents