Maintenance And Repair; Cleaning And Care; Inspection And Maintenance; Repair - Bosch rexroth VT-SSV-1 Operating Instructions Manual

Maintenance and repair | Plug-in switching amplifier VT-SSV

10 Maintenance and repair

10.1

CLEANING AND CARE

Ingress of contaminants and humidity!
Malfunction and loss of function.
▶ When working on electronics observe strictest cleanliness.
▶ Only use a dry and dust-free cloth for cleaning.
Solvents and aggressive cleaning agents!
Damage and accelerated aging of electronics.
▶ Do not use aggressive cleaning agents for cleaning, but only a dry and dust-
free cloth.
Proceed as follow for cleaning and care:
▶ Carry out a visual inspection and check that all screws are tightened and hoses
fit properly.
▶ Check all plug-in and clamped connections at least once a year for correct fit
and damage.
▶ Inspect cables for rupture and crushes. Have damaged or defective cables
replaced immediately!
▶ Clean housing parts with a dry and dust-free cloth.
10.2

INSPECTION AND MAINTENANCE

Maintenance of Bosch Rexroth electronics is restricted to the points described
under chapter 10.1"Cleaning and care" above.
10.3

REPAIR

Bosch Rexroth electronics can only be replaced as a complete unit. Unauthorized
modifications to devices are not permitted for safety reasons! Repairs may only
be carried out by Bosch Rexroth AG. For repairs send the device to the service
address given in chapter 16.1.
Please return the devices to us in their original packaging.
Repaired devices are returned with factory settings.
In the case of parameterized devices, user-specific settings are not maintained.
The operator has to transmit the relevant user parameters again.
NOTICE
RE 30262-B, Edition 05.2022, Bosch Rexroth AG
17/24