Security instructions Caution Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electrical shock, fire, and/or serious injury. Observe the relevant safety precautions when using the tool. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 3
If devices are used for dust extraction and collection, make sure they are properly connected. Properly use these devices and you will reduce dust- related hazards. g. Maintain posture and balance at all times. This allows for better control of the power tool in unexpected situations.
a. Have your power tool serviced by a qualified person and use replacement parts recommended by the manufacturer. This will ensure that the safety of the power tool is maintained. Additional security warnings You must observe the following basic safety precautions against electrical shock, injury, and fire hazard when using power or battery-powered tools.
Safety rules for correct use Double insulation for additional protection Please read the instruction manual before use. CE conformity. Wear safety glasses, hearing protection and a dust mask. Waste electrical products must not be disposed of with household waste. Please recycle at the appropriate facilities. Check with your local authority or retailer for recycling advice.
Caution This power tool produces an electromagnetic field during operation. This field can, in some circumstances, interfere with active or passive medical implants. To reduce the risk of serious injury, we recommend that persons with medical implants consult their physician before using this power tool. If the cable is damaged or cut during work, do not touch the cable, immediately unplug the tool.
Important safety instructions for the battery cartridge 1. Before using the battery, read all instructions and cautionary markings on: a. The battery charger b. Battery c. Product 2. Do not disassemble the battery cartridge. 3. If the operating time has been shortened excessively, stop using it immediately. It can result in overheating, possible burns, and even an explosion.
Page 8
Hold the tool and battery cartridge firmly when installing or removing the battery cartridge. Failure to hold the tool and battery cartridge may cause them to fly out of your hands and result in damage to the tool, battery cartridge, or personal injury. 1.
Page 9
After use, always press the lock button from side A. electric brake This tool is equipped with an electric brake. If the tool consistently does not stop quickly after releasing the switch trigger, take the tool to your official Total dealer. Set up Attention Always make sure the tool is turned off and the battery removed before doing any work on the tool.
Page 10
1. Saw blade 2. Blade holding sleeve Caution If you do not insert the reciprocating saw blade deep enough, the reciprocating saw blade may come out unexpectedly during operation. This can be extremely dangerous. To remove the reciprocating saw blade, fully rotate the blade clamp lever in the direction of the arrow.
First, make a pilot groove using a slower speed. Then use a faster speed to continue cutting. Caveat Always press the shoe firmly against the workpiece during operation. If the shoe • is removed or held away from the workpiece during operation, strong vibrations and/or twisting will occur, causing the blade to snap dangerously.
Environment Do not dispose of electrical appliances as unsorted municipal waste, use • separate collection facilities. • Contact your local authority for information on available collection systems. • If electrical appliances are disposed of in landfills, hazardous substances can seep into the groundwater and enter the food chain, harming your health and well-being.
Need help?
Do you have a question about the TRSLI1151 and is the answer not in the manual?
Questions and answers