Electromagnetic Immunity - AGFA XD 10 User Manual

Electromagnetic immunity

This DR Detector is intended for operation in the electromagnetic
environment given below. The user of the DR Detector should ensure that it is
used in such an environment.
Resistance to Jam-
ming Test
Discharge of static
electricity in accord-
ance with
IEC 61000-4-2
Fast transient elec-
trical disturbance
variables / bursts in
accordance with
IEC 61000-4-4
Impulse voltages
(surges) in accord-
ance with IEC
61000-4-5
Voltage break-
throughs, short
term interruptions
and variations in
the voltage supplied
in accordance with
IEC 61000-4-11
XD 10, XD⁺10 | Remarks for HF-emission and immunity | 131
IEC 60601 Level of
Test Level Agreement
± 8 kV contact ± 8 contact
discharge discharge
± 15 kV air ± 15 kV air
discharge discharge
± 2 kV for net- ± 2 kV for net-
work leads work leads
± 1 kV for en- ± 1 kV for en-
try and outlet try and outlet
leads leads
± 1 kV push- ± 1 kV push-
pull voltage pull voltage
± 2 kV com- ± 2 kV com-
mon mode mon mode
voltage voltage
100% reduc- 100% reduc-
tion for 0.5 cy- tion for 0.5 cy-
cle at 0, 45, 90, cle at 0, 45, 90,
135, 180, 225, 135, 180, 225,
270 and 315 270 and 315
degrees degrees
100% reduc- 100% reduc-
tion for 1 cycle tion for 1 cycle
30% reduction 30% reduction
for 25/30 cy- for 25/30 cy-
cles at 0 de- cles at 0 de-
gree gree
Electromagnetic
Environment
Guidelines
Floors should con-
sist of wood, con-
crete or ceramic
tiles. The relative
humidity must be at
least 30%, if the
floor is made of syn-
thetic material.
The quality of the
voltage supplied
should correspond
to a typical commer-
cial or clinical envi-
ronment.
The quality of the
voltage supplied
should correspond
to that of a typical
commercial or clini-
cal environment.
The quality of the
voltage supply
should correspond
to that of a typical
commercial or clini-
cal environment. If
the user wants the
DR Detector to work
continuously, even
when the energy
supply is interrup-
ted, it is recommen-
ded to use an ener-
gy supply free of in-
0432A EN 20210426 1355