Table of Contents
Advertisement
68 | XD 10, XD⁺10 | Introduction to the DR Detector
0432A EN 20210426 1355
CAUTION:
Handle the equipment carefully. Do not submerge the
equipment in water. The internal image sensor may be damaged
if something hits against it, or if it is dropped, or receives a
strong jolt.
CAUTION:
Do not place excessive weight on the detector. Avoid the whole
weight of the patient body to rest on the detector. Otherwise,
the internal image sensor may be damaged. Load limit - Uniform
load: 400 kg over the whole area of the detector surface. Load
limit - Local load: 200 kg on an area 40 mm in diameter.
CAUTION:
Be sure to use the detector on a flat and rigid surface so it will
not bend. Otherwise, the internal image sensor may be
damaged. Be sure to securely hold the detector while using it in
upright positions. Otherwise, the detector may fall over,
resulting in injury to the user or patient, or may flip over,
resulting in damage to the inner device.
CAUTION:
If a malfunction occurs, do not use this device until qualified
personnel correct the problem.
Should any of the following occur, immediately turn OFF the
power to each piece of equipment, unplug the power cord from
the AC outlet, and contact your sales representative or local
dealer:
• When there is smoke, an odd smell or abnormal sound
• When liquid has been spilled into the equipment or a metal
object has entered through an opening
• When the equipment has been dropped and is damaged
CAUTION:
Observe great care when handling the DR Detector. The detector
is shock sensitive and drops should be avoided. Warranty will be
void if it is obvious that operating conditions are not met.
If the DR Detector has been dropped:
1. Visually check the DR Detector for deformations.
Advertisement
Table of Contents
