Electromagnetic Immunity - AGFA DR 18M User Manual

Electromagnetic immunity

This DR Detector is intended for operation in the electromagnetic
environment given below. The user of the DR Detector should ensure that it is
used in such an environment.
Resistance to
Jamming Test
Discharge of
static electricity
in accordance
with
IEC 61000-4-2
Fast transient
electrical
disturbance
variables /
bursts in
accordance with
IEC 61000-4-4
Impulse voltages
(surges) in
accordance with
IEC 61000-4-5
Voltage
breakthroughs,
short term
interruptions
and variations in
the voltage
supplied in
accordance with
IEC 61000-4-11
DR 18M, DR 24M | Remarks for HF-emission and immunity | 75
IEC 60601 Test Level of
Level Agreement
± 6 kV contact ± 6 contact
discharge discharge
± 8 kV air ± 8 kV air
discharge discharge
± 2 kV for ± 2 kV for
network leads network leads
± 1 kV for entry ± 1 kV for entry
and outlet leads and outlet leads
± 1 kV push- ± 1 kV push-
pull voltage pull voltage
± 2 kV common ± 2 kV common
mode voltage mode voltage
< 5% Ur < 5% Ur
(> 95% (> 95%
breakthrough of breakthrough of
Ur) for ½ Ur) for ½
period period
40% Ur (> 60% 40% Ur (> 60%
breakthrough of breakthrough of
Ur) for 5 Ur) for 5
periods periods
70% Ur (30% 70% Ur (30%
breakthrough of breakthrough of
Ur) for 25 Ur) for 25
periods periods
Electromagnetic
Environment
Guidelines
Floors should consist
of wood, concrete or
ceramic tiles. The
relative humidity
must be at least 30%,
if the floor is made of
synthetic material.
The quality of the
voltage supplied
should correspond to
a typical commercial
or clinical
environment.
The quality of the
voltage supplied
should correspond to
that of a typical
commercial or
clinical environment.
The quality of the
voltage supply
should correspond to
that of a typical
commercial or
clinical environment.
If the user wants the
DR Detector to work
continuously, even
when the energy
supply is
interrupted, it is
recommended to use
an energy supply
0380A EN 20180703 1429