AGFA XD 10 User Manual page 69

Topics:
• Safety directions for the power supply
• Safety directions for the System Control Unit
• Safety directions for the DR detector battery
XD 10, XD⁺10 | Introduction to the DR Detector | 69
2. Perform a calibration of the DR Detector. For instructions, refer
to the DX-D DR Detector Calibration Key User Manual
(document 0134).
3. Perform a flat field exposure and check the image for visible
artifacts. Typical flat field exposure settings are 75 kV, 10 µGy,
large focus and using 1.5 mm Cu filter without grid.
CAUTION:
Damaged grid. Reduced image quality. Please handle the grids
with special care.
0432A EN 20210426 1355