Table of Contents
Advertisement
110 | XD 10, XD⁺10 | Advanced Operating
Connecting the MUSICA Acquisition Workstation to another
DR detector (access point mode)
The DR detector is configured in access point mode.
To connect the MUSICA Acquisition Workstation to another DR detector:
1. On the MUSICA Acquisition Workstation, swipe in from the right side of
the screen.
The Windows action center is displayed.
Figure 30: Windows action center with Wifi button highlighted
2. Touch the Wifi button
The available wireless networks are displayed.
3. Select the name of the DR detector.
4. Touch the Connect button.
The MUSICA Acquisition Workstation is connected to the DR detector.
Related Links
Configuration
0432A EN 20210426 1355
Hospital Network
WARNING:
If the network connection is interrupted, the MUSICA
DR Detector 1
Acquisition Workstation may reconnect to different access point
if the option Connect automatically in the Windows wifi
DR Detector 2
settings is enabled. Do not enable the option Connect
automatically when connecting to the hospital network or to a
DR detector.
Wi-Fi
on page 14
Advertisement
Table of Contents
