Graco SaniForce STU Operation page 42

Electro-pneumatic Control Panel Display Screens
Material Recipe Recipe Edit Edit Screen
Material Material Recipe Edit
When creating a new recipe from scratch, default
pressure settings are shown. These pressures
are good starting points, but most pressure
settings will have to be varied to obtain optimal
performance for the specific application.
The viscosity of the product being pumped will
require a different mix of pressure settings. If
differing viscosities of the same product are
pumped, a recipe with a defined viscosity can be
copied and used as a template to define a new
recipe for the additional viscosity. This creates
a new recipe without needing to enter all new
values. Only the values that must change need
to be entered.
Icon/Field Icon/Field Icon/Field
Recipe Recipe Name Recipe Name Name
Lock Lock Lock
Auto Auto Raise Auto Raise Raise
42
Triplex Sales
1-847-839-8442
www.triplexsales.com
Screen
Screen
Description Description Description
Copy From... From...
Copy Copy From...
Press to complete the fields of this recipe with the values assigned to
another recipe. The copied values will overwrite any defined values in this
recipe. After copying, individual fields can be modified to differentiate this
recipe from the one copied.
NOTE: Copying a locked recipe will also copy the password and save the
NOTE: NOTE:
new recipe as a locked recipe.
User-defined alphanumeric field, 19 characters maximum.
When locked, the password defined on the System Settings page must be
entered to edit the selected recipe. A locked recipe cannot have pressure
settings changed on the Manual screen.
recipe not locked
recipe locked
When checked, an automatic sequence will attempt to lift the ram plate out
of the container and raise the ram to the top of its travel. If not checked,
the ram plate will remain at the location where it is when an automatic
sequence completes.
If using batching and the tote is empty before the batch has completed,
the ram plate will auto raise so that another tote can be placed and the run
button pressed to resume the batch unload.
Auto Raise off
Auto Raise on
3A5416L