Slave Data Output - Toshiba DeviceNet nv Series Instruction Manual

4.4.4 Slave data output

1) Function
During operation in asynchronous mode, output data to a specified slave device is written in the output data
area (bit strobe or polling) of the DN611B.
2) Diagrammatic representation (Function block)
Input Argument
REQ BOOL type
CH WORD type
UNIT WORD type
SLOT WORD type
NODE UNIT type
BS WORD type
Data structural
ASWRITE_DT
type
ASWRITE_DT Structural data type
ASWRITE_DT structure:
WDAT[0]
WDAT[1]
WDAT[2]
WDAT[3]
WDAT[4]
WDAT[5]
DN_ASWRITE
REQ
CH
UNIT
STATUS
SLOT
NODE
BS
ASWRITE_DT
Execution enabled
Channel No.
Unit No.
Slot No.
Node address
Bit strobe selection
1: Bit strobe
0: Polling
Output data to slave
device
Slave device output data
WORD type Slave device output data 1
WORD type Slave device output data 2
WORD type Slave device output data 3
WORD type Slave device output data 4
WORD type Slave device output data 5
WORD type Slave device output data 6
Unified Controller nv Series DeviceNet Module DN611B Instruction Manual
DONE
ERR
Output Argument
DONE BOOL type
ERR BOOL type
STATUS WORD type
4.4 Slave Data Input / Output
Completed
Error
Station status
67