Toshiba DeviceNet nv Series Instruction Manual page 87

4.6 DeviceNet network setting
For details on how to use the DeviceNet setting tool, refer to the ACM manual.
This chapter describes about simple operation method for registering DeviceNet slave I / O devices using ACM.
If the screen or setting method changes due to ACM version upgrade, etc., refer to the ACM instruction manual.
This chapter uses the following diagram as an example of the configuration.
PUM12
■DeviceNet Node Address=1
DN611B
Allen-Bradley Flex I/O Node Address = 3
1794-ADN 1794-IB16 1794-OB16
[1] [2] [3]
Input Address Input Address Output Address
DeviceNet
= 0 to 1 = 2 to 5 = 0 to 3
DN611B Memory Map
Input Data Area
IB16 Input
Output Data Area
OB16 Output
Figure 4-10 Example of system configuration using DN611B and its settings
71
Unified Controller nv Series DeviceNet Module DN611B Instruction Manual