Step 4. Driver Connection - Create WIND FOLD Manual

7
H
With the help of a screw-
driver, remove the 2 screws
from the top of the piece H.
10
H
Put the locking piece on the
pin so that it does not come
out.
B
DRIVER
16 ENGLISH
8
H
Insert the seatpost into the
top of the piece H. Make
sure no wires get pinched.
11
Then replace
screws so that the post is
fully attached.

STEP 4. DRIVER CONNECTION

+
the two
O
SPLICING TERMINALS
9
Once the seatpost has been
inserted, place the pin of the
piece I/J so that it matches
the hole in the seatpost.
12
Once the stem is well an-
chored to the piece H, the
main body of the fan motor
will be assembled.
+