Create WIND FOLD Manual page 18

10
Connect the L cable of the
driver to the PHASE cable
of your installation.
13
A
slide piece A upwards to fit it on the protruding screws of
the piece K.
16
Finally, with the help of a screwdriver, tighten the screws so that the piece is well fixed.
18 ENGLISH
11
Connect the N wire of the
driver to the NEUTRAL wire
of your installation.
14
K
17
12
Make sure everything is at-
tached correctly.
15
Once fitted, turn the piece
A toward the left. Make sure
no wires get pinched.
18