Table of Contents
Advertisement
60
GETTING TO KNOW YOUR VEHICLE
A
P
F
UTOMATIC
OWER
OLDING
M
— I
E
IRRORS
F
QUIPPED
When enabled within Uconnect Settings
Ú page 188, the exterior mirrors will automatically
fold when the vehicle's ignition is placed in the
OFF position, and after the doors are locked and
closed.
The exterior mirrors will auto-fold in the following
situations after the ignition is placed in the OFF
position:
Pushing the lock button on the door panel
before the door is opened.
NOTE:
If the doors are already locked, push the lock
button again.
Opening the door, then pushing the lock button
on the door panel, followed by closing the door.
After exiting the vehicle, close the doors then
push the lock button on the key fob.
After exiting the vehicle, close the doors then
touch the lock icon on the Passive Entry door
handle.
If the exterior mirrors were folded automatically,
they will unfold when the ignition is placed in the
ON/RUN position.
NOTE:
If the mirrors were folded manually, by using the
power folding mirror switch on the driver's door
panel, they will not automatically unfold.
O
M
F
UTSIDE
IRRORS
OLDING
All outside mirrors are hinged and may be moved
either forward or rearward to resist damage. The
hinges have three detent positions:
Full forward position
Full rearward position
Normal position
H
M
— I
E
EATED
IRRORS
F
QUIPPED
These mirrors are heated to melt frost or
ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped) Ú page 72.
T
S
M
ILT
IDE
I
E
F
QUIPPED
Tilt Side Mirrors In Reverse provides automatic
outside mirror positioning which will aid the
driver's view of the ground rearward of the front
doors. The driver's outside mirror will move slightly
downward from the present position when the
F
EATURE
vehicle is shifted into REVERSE. The driver's
outside mirror will then return to the original
position when the vehicle is shifted out of the
REVERSE position. Each stored memory setting will
have an associated Tilt Side Mirrors In Reverse
position.
NOTE:
The Tilt Side Mirrors In Reverse feature can be
enabled or disabled through the Uconnect system
Ú page 188.
I
R
—
IRRORS
N
EVERSE
Advertisement
Table of Contents
