Parksense Active Park Assist; System - If Equipped; Enabling And Disabling The Parksense Active Park Assist System - Chrysler Pacifica 2022 Owner's Manual

162 STARTING AND OPERATING
CAUTION!
ParkSense is only a parking aid and it is

unable to recognize every obstacle, including
small obstacles. Parking curbs might be
temporarily detected or not detected at all.
Obstacles located above or below the sensors
will not be detected when they are in close
proximity.
The vehicle must be driven slowly when using

ParkSense in order to be able to stop in time
when an obstacle is detected. It is recom-
mended that the driver looks over his/her
shoulder when using ParkSense.
PARKSENSE ACTIVE PARK ASSIST SYSTEM —
IF EQUIPPED
The ParkSense Active Park Assist system is
intended to assist the driver during parallel and
perpendicular parking maneuvers by identifying a
proper parking space, providing audible/visual
instructions, and controlling the steering wheel.
The ParkSense Active Park Assist system is
defined as "semi-automatic" since the driver
maintains control of the accelerator, gear selector
and brakes. Depending on the driver's parking
maneuver selection, the ParkSense Active Park
Assist system is capable of maneuvering a vehicle
into a parallel or a perpendicular parking space on
either side (i.e., driver side or passenger side).
NOTE:
The driver is always responsible for controlling

the vehicle, responsible for any surrounding
objects, and must intervene as required.
The system is designed to assist the driver and

not to substitute the driver.
During a semi-automatic maneuver, if the driver

touches the steering wheel after being
instructed to remove their hands from the
steering wheel, the system will cancel, and the
driver will be required to manually complete the
parking maneuver.
The system may not work in all conditions (e.g.

environmental conditions such as heavy rain,
snow, etc., or if searching for a parking space
that has surfaces that will absorb the ultrasonic
sensor waves).
New vehicles from the dealership must have at

least 30 miles (48 km) accumulated before the
ParkSense Active Park Assist system is fully
calibrated and performs accurately. This is due
to the system's dynamic vehicle calibration to
improve the performance of the feature.
The use of wheels and tires that are different

size to the original equipment could affect the
operation of the system.
E A D
NABLING ND ISABLING
P S A P
ARK ENSE CTIVE ARK
S
YSTEM
The ParkSense Active Park Assist system can be
enabled and disabled with the ParkSense Active
Park Assist switch, located on the switch panel
below the Uconnect display.
To enable or disable the ParkSense
Active Park Assist system, push the
ParkSense Active Park Assist switch once
(LED turns on). Pushing the switch a
second time will disable the system (LED turns off).
The ParkSense Active Park Assist system will turn
off automatically for any of the following
conditions:
Parking maneuver is completed.

Vehicle speed is greater than 18 mph (30 km/h)

when searching for a parking space.
Vehicle speed is greater than 5 mph (7 km/h)

during active steering guidance into the parking
space.
Steering wheel is touched during active steering

guidance into the parking space.
ParkSense switch is pushed.

The driver's door is opened.

T
HE
A
SSIST