Table of Contents
Advertisement
Setting Name
Control Screen Timeout
Navigation Next Turn Displayed in Cluster
Phone Pop-Ups Displayed In Cluster
Ready To Drive Pop-Ups
Safety & Driving Assistance
After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
Forward Collision Warning Sensitivity — Located In Automatic Emergency
Braking Submenu
Forward Collision Warning — Located In Automatic Emergency Braking
Submenu
Description
This setting allows you to set the Control Screen to turn off automatically after
five seconds or stay open until manually closed.
This setting will display navigation prompts in the Instrument Cluster Display.
This setting will display smartphone notifications and messages in the
Instrument Cluster Display.
This setting will enable the Ready To Drive Pop-Ups in the Instrument
Cluster Display.
Description
This setting will change the distance at which the Forward Collision Warning
(FCW) alert sounds. The "Medium" setting will have the FCW system signal
when an object is in view, and the possibility of a collision is detected. The
"Near" setting will have the FCW system signal when the object is closer to the
vehicle. The "Far" setting will have the FCW system signal when an object is at
a far distance from the vehicle.
This setting will turn the Forward Collision Warning system on or off. The "Off"
setting will deactivate the FCW system. The "Warning Only" setting will provide
only an audible chime when a collision is detected. The "Warning + Active
Braking" setting will provide an audible chime and apply some brake pressure
when a collision is detected.
MULTIMEDIA
195
5
Advertisement
Table of Contents
