Table of Contents
Advertisement
274
SAFETY
What is the weight limit (child's weight + weight of the child
restraint) for using the Tether Anchor with the seat belt to
attach a forward facing child restraint?
Can the rear-facing child restraint touch the back of the front
passenger seat?
Can the rear head restraints be removed?
Can the buckle stalk be twisted to tighten the seat belt
against the belt path of the child restraint?
NOTE:
If the folding, non-adjustable head restraint interferes with the installation of the child restraint, the head restraint may be folded and the child seat installed in
front of it.
Always make sure the head restraint is in its upright position when the seat is to be used by an occupant who is not in a child restraint. Sitting in a seat with
the head restraint in its lowered position could result in serious injury or death in a collision.
Frequently Asked Questions
Always use the tether anchor when using the seat belt to
Weight limit of the Child
install a forward facing child restraint, up to the
Restraint
recommended weight limit of the child restraint.
Contact between the front passenger seat and the child
Yes
restraint is allowed, if the child restraint manufacturer also
allows contact.
The 2nd row head restraints on bench and the center head
restraint in the 8 passenger vehicle can be removed if they
interfere with the installation of the child restraint. 2nd row
Yes
Stow 'n Go head restraints are not removable. The 3rd row
center head restraint is removable in all vehicles, but the 3rd
row outboard head restraints are not removable Ú page 52.
Do not twist the buckle stalk in a seating position with an ALR
No
retractor.
WARNING!
Advertisement
Table of Contents
