Table of Contents
Advertisement
For the Uconnect 5 With 7-inch Display and the Uconnect 5/5 NAV With 10.1-inch Display
KeySense
The vehicle's KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first
time. This four-digit PIN can only be reset by an authorized dealer.
After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available:
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
Forward Collision Warning Sensitivity
Forward Collision Warning
ParkSense
Front ParkSense Volume
Description
This setting will change the distance at which the Forward Collision Warning
(FCW) alert sounds. The "Medium" setting will have the FCW system signal
when an object is in view, and the possibility of a collision is detected. The
"Near" setting will have the FCW system signal when the object is closer to the
vehicle. The "Far" setting will have the FCW system signal when an object is at
a far distance from the vehicle.
This setting will turn the Forward Collision Warning (FCW) system on or off. The
"Warning Only" setting will provide only an audible chime when a collision is
detected. The "Warning + Active Braking" setting will provide an audible chime
and apply some brake pressure when a collision is detected.
This setting will change the type of ParkSense alert when a close object is
detected. The "Sound Only" setting will provide an audible chime when an
object is detected. The "Sound and Display" setting will provide both an
audible chime and a visual display when an object is detected.
This setting adjusts the volume of the Front ParkSense system. The available
settings are "Low", "Medium", and "High".
MULTIMEDIA
189
5
Advertisement
Table of Contents
